NeoSol unveils 550 W mono PERC module

Share

Haryana-based NeoSol has unveiled Black Pearls series mono PERC modules in multibusbar design.

The modules are built with 144 half-cut mono PERC cells, formed using gallium (Ga)-doped wafers, and ten busbars. These are available in power outputs ranging from 535 W to 550 W, with power conversion efficiency between 20.7% and 21.33% under standard test conditions. The open-circuit voltage is 49.98 V to 50.62 V, and the short-circuit current 13.5 A to 13.86 A.

“The USP of this range is high module efficiency, shade tolerance, less hot spots, and reduced power loss. The modules are cost effective and provide maximum output from a limited space,” Arpit Aggarwal, managing director, NeoSol told pv magazine.

Each panel has dimensions of 2,278×1,134×35 mm and weighs 29 kg. It features a 3.2 mm anti-reflective tempered glass, composite film backsheet, and silver anodized aluminum frame (black frame available on request). The maximum system voltage is 1,500 V DC. The panel has a Pmax temperature coefficient of -0.35% per degree Celsius, and its operating temperature ranges from -40°C to +85°C.

The panel is certified to withstand wind-induced load of 2,400 Pascal and snow load of 5,400 Pascal.

This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.

Popular content

Waaree Energies approves investment in 300 MW electrolyzer, 3.5 GWh lithium-ion battery cell units
23 December 2024 Waaree Energies' board of directors has approved investment in setting up a 300 MW electrolyzer manufacturing plant and a 3.5 GWh Lithium-ion battery...