Gautam Solar launches n-type TOPCon solar modules in India

Share

Gautam Solar is showcasing its n-type TOPCon solar modules at the Renewable Energy India (REI) Expo 2023 from 4th to 6th October.

The modules will be available in power ratings of 565 Wp to 580 Wp with a maximum efficiency of 22.45%. These are best suited for ground mounted projects. Certified as per UL and IEC Standards, these are already available for the US and European markets.

“Gautam Solar’s n-type TOPCon modules have a lower degradation rate of 1% in the first year and 0.4% in subsequent years unlike 2% in the first year and 0.55% in subsequent years for p-type modules. This increases the longevity of the solar modules. The module degrades only to 87.4% of its initial rated power at the end of 30 years compared to p-type modules which degrade to 84.8% in their 25 years lifecycle,” according to Gautam Solar. “In addition, Gautam Solar’s n-type modules also provide BOS cost savings of 3.26% and LCOE reduction of 1.56%.”

The modules are based on M10 cells and are composed of 144 half-cut cells produced using non-destructive cutting process for better low-light performance and negligible chances of micro-cracks. In addition, they feature multi-busbar design with round ribbon connectors for lower electrical losses and better utilization of light.

Gautam Solar stated the modules will be available in both monofacial and bifacial variants, with the bifacials providing an additional 10-30% power from the rear side, depending on the installation conditions.

This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.

Popular content

Waaree Energies approves investment in 300 MW electrolyzer, 3.5 GWh lithium-ion battery cell units
23 December 2024 Waaree Energies' board of directors has approved investment in setting up a 300 MW electrolyzer manufacturing plant and a 3.5 GWh Lithium-ion battery...