Technology

A Jordanian research team has designed a cleaning technique for solar modules that uses static electricity to remove dust from panel surfaces. The system features an electrostatic ionizer that reduces attraction between dust particles and their accumulation on modules, improving their energy yield.

Researchers in India have combined PV generation with heat produced by an earth-to-air heat exchanger to provide buildings with space heating and cooling. They say the proposed system could result in an annual energy gain of 8116.7 kWh.

The green hydrogen production, compression, storage, and distribution facility will be powered by an in-situ hybrid renewable power and storage plant.

Sarcos has designed a robotic PV construction solution that delivers, detects, lifts, and places PV modules in large-scale solar plants. It has recently field tested and validated the prototype solution in a pilot project funded by the US Department of Energy.

The US National Renewable Energy Laboratory (NREL) and First Solar have used cracked film lithography (CFL) to build a bifacial cadmium telluride solar cell with a power density of 20.3 mW cm−2. They claim the cell has a higher bifacial power density than any polycrystalline absorber currently manufactured at scale.

With this arrangement, Neogen gets access to a proven global technology to manufacture electrolytes at scale for lithium-ion batteries in India.

Israeli company Brenmiller is set to launch a 4 GW to 5 GW production line for its thermal energy storage systems, which use crushed rocks to retain heat that can be released as steam, hot water, or hot air.

Stanford University researchers have created a model to assess how much compressed air storage capacity might be needed for the deep decarbonization of power systems, while compensating for the variability of wind and solar-based power systems. They applied the model to California’s energy system and found that compressed air could be very competitive on a dollars-per-kilowatt-hour basis.

Hungary’s Platio has inaugurated a solar footpath in the Dutch city of Groningen. The installation consists of 2,544 monocrystalline Patio solar pavers with a 21.8% efficiency rating. It will generate 55,000 kWh of electricity per year and can purportedly withstand a pressure of 2 tons without microcracks.

Set to commence production shortly, the CO2-to-methanol plant is being established at NTPC’s existing thermal power station in Vindhyachal, Madhya Pradesh. It will convert 20 tonnes-per-day (tpd) of CO2 to 10 tpd methanol through a catalytic hydrogenation process, utilizing CO2 from thermal plant flue gas through a carbon capture unit and green hydrogen produced by electrolysis.